Sensing method | Diffuse-reflective |
---|---|
Sensing distance | 0 mm to 700 mm (White paper 200*200mm) |
Differential distance | 20% Max. of sensing distance |
Light source | Infrared LED (950nm) |
Power supply voltage | 12 to 240 VDC -10% to 10% (ripple(p-p) :10% Max.) 24 to 240 VAC -10% to 10% |
Power consumption | 2W DC Max. 2W AC Max. |
Control output (Output type) | Relay output |
Control output (Load current) | 0 to 3 A |
Life expectancy (relay output) | Electrical: 100 thousand times or more(switching frequency 1800 times/hour) Mechanical: 50 million times or more(switching frequency 18000 times/hour) |
Operation mode | Light-ON/Dark-ON selectable |
Load power supply voltage | 5 VDC Min. 250 VAC Max. |
Response time | 30 ms Max. |
Sensitivity setting | Single-turn adjustment |
Ambient illuminance | Incandescent lamp:3000 lux Max. |
Ambient temperature | Operating: -25 to 55 CEL Storage: -30 to 70 CEL (with no icing or condensation) |
Ambient humidity | Operating: 45 to 85 %RH Storage: 35 to 95 %RH (with no condensation) |
Insulation resistance | 20 M OHM Min. at 500 VDC between charged parts and the case |
Dielectric strength | 2000 VAC at 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 500m/s2 for 3 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP66 |
Applicable standard (EC Directive (EMC Directive)) | CE marking: Equipped |
Applicable standard (CCC mark) | Equipped |
Connection method | Terminal block models |
Indicator | Light indicator(red) |
Weight (packed state) | approx. 160 g |
Tightening torque | 2 N.m Max. (with M4 screw) |
Material (case) | ABS |
Material (lens) | Methacylate resin |
Material (cover) | Polycarbonate |
Material (mounting bracket) | Iron |
Accessories | Instruction manual, Mounting bracket, Nut, Terminal protection cover, One set of cable connection nuts |